AUTOMATIC TRANSFER SWITCH PANEL (ATS) 2 POLES SINGLE-PHASE 90 AMP | CONTACTORS ABB

Download our complete catalogue of switch panels here.

AUTOMATIC TRANSFER SWITCH PANEL (ATS)    2 POLES SINGLE-PHASE 90 AMP WITH    CONTACTORS

Automatic switchboard (ATS)

Genset Components' ATS control panels have a DSE 334 control unit that detects when there is a mains failure and sends a start signal to the generator set control unit.

Once started and ready, the DSE334 switchboard control unit manoeuvres to allow the change of electrical supply (which feeds the load of an installation) between the electrical network and the generating set and vice versa when the network is re-established.

The commutation is made up of two motorised contactors or selectors with mechanical and electrical interlocking.

This electrical panel is applicable to any generating set that has any remote control central or start by signal.

Characteristic:

Electrical panel in metal cabinet with IP-67 protection degree.
Two motorized contactors or selectors (depending on the model of electrical panel), equipped with mechanical and electrical interlocking, which prevents both from being closed simultaneously, thus avoiding possible short-circuit situations.
Protection fuses.
Terminal block for controlling and manoeuvring the generating set.
Terminal block for the connections of the power cables for the input of the generating set, the input of the network and the output of the load.
Connection wiring of all the electrical elements of the panel. Each cable identified with its reference number at each end for easy installation and configuration.
Battery charger.
Transformers
Emergency stop button.
Contact key (for power supply to the control unit).
Deep Sea Electronics 334 control center.
Front door with locking key.
Bottom cover for cable access.
Approximate weight: 20kg          

Dimensions of the electrical panel (mm): 600x400x260

All our electrical panels can be adapted to the customer's requirements.